Cover Image

Influence of Alkali Treatment on Mechanical and Morphological Properties of Single Agave Angustifolia Fibre

Noor Afizah Rosli, Farah Hannan Anuar, Ishak Ahmad

Abstract


The effect of alkali treatment on physical, tensile, and morphological properties of single Agave Angustifolia fibre was investigated. The fibre was extracted from Agave Angustifolia leaves using a fibre extracting machine. Alkali treatment using NaOH by reflux method for 2 hours was performed on the single fibre of Agave Angustifolia. The treated and untreated single Agave Angustifolia fibre's mechanical properties were tested using tensile tests. The alkali-treated single fibres show higher tensile strength, Young's modulus, and elongation at break than that of the untreated fibres. The crystallinity index and crystallite size increased after alkali treatment from X-ray diffraction analysis. Scanning electron and optical microscopy micrographs showed that Agave Angustifolia fibres' diameter decreased with alkali treatment. Besides, micrographs also reveal the reduction of the fibre's surface roughness with alkali treatment. Comparing the treated and untreated Agave Angustifolia fibres' mechanical properties with other well-known fibres show that this fibre has excellent potential to reinforce materials in various types of polymer matrices.


Keywords


Physical properties, SEM, Single fibre test; Tensile test, X-ray diffraction

Full Text:

PDF

References


Balaji, A.N., & Nagarajan, K.J. Characterisation of alkali treated and untreated new cellulosic fiber from Saharan aloe vera cactus leaves. Carbohydr. Polym., (2017)174: 200–208.

Dalmis, R., Kilic, G. B., Seki, Y., Koktas, S., & Keskin, O.Y. Characterisation of a novel natural cellulosic fiber extracted from the stem of Chrysanthemum morifolium. Cellulose, (2020) 27(15): 8621–8634.

Ravindran, D., Sundara Bharathi, S.R., Padma, S.R., Indran, S., & Divya, D. Characterisation of natural cellulosic fiber extracted from Grewia damine flowering plant's stem. Int. J. Biol. Macromol., (2020) 164: 1246–1255.

Keskin, O.Y., Dalmis, R., Kilic, G.B., Seki, Y., & Koktas, S. Extraction and characterisation of cellulosic fiber from Centaurea solstitialis for composites. Cellulose, (2020) 27(17): 9963–9974.

Siva, R., Valarmathi, T.N., Palanikumar, K., & Samrot, A.V. Study on a Novel natural cellulosic fiber from Kigelia africana fruit: Characterisation and analysis. Carbohydr. Polym., (2020) 116494.7.

Sarala, R. Characterisation of a new natural cellulosic fiber extracted from Derris scandens stem. Int. J. Biol. Macromol., (2020) 165: 2303–2313.

Kumar, R., Sivaganesan, S., Senthamaraikannan, P., Saravanakumar, S.S., Khan, A., Ajith Arul Daniel, S., & Loganathan, L. Characterisation of New Cellulosic Fiber from the Bark of Acacia nilotica L. Plant. J. Nat. Fibers, (2020) 1–10.

Rosli, N.A., Ahmad, I., & Abdullah, I. Isolation and characterisation of cellulose nanocrystals from Agave angustifolia fibre. BioResources, (2013) 8(2): 1893–1908.

Rosli, N.A., Ahmad, I., Anuar, F.H., & Abdullah, I. Effectiveness of cellulosic Agave angustifolia fibres on the performance of compatibilised poly (lactic acid)-natural rubber blends. Cellulose, (2019) 26(5): 3205–3218.

Rosli, N.A., Ahmad, I., Anuar, F.H., & Abdullah, I. Application of polymethylmethacrylate-grafted cellulose as reinforcement for compatibilised polylactic acid/natural rubber blends. Carbohydr. Polym., (2019) 213: 50–58.

Binoj, J.S., Raj, R.E., Sreenivasan, V.S., & Thusnavis, G.R. Morphological, physical, mechanical, chemical and thermal characterisation of sustainable indian areca fruit husk fibers (Areca Catechu L.) as potential alternate for hazardous synthetic fibers. J. Bionic Eng., (2016) 13(1): 156–165.

Mohanty, A.K., Misra, M., & Drzal, L.T. Surface modifications of natural fibers and performance of the resulting biocomposites: An overview. Compos. Interfaces, (2001) 8(5): 313–343.

Li, M., Pu, Y., Thomas, V.M., Yoo, C.G., Ozcan, S., Deng, Y., Nelson, K. and Ragauskas, A.J. Recent advancements of plant-based natural fiber–reinforced composites and their applications. Compos. B. Eng., (2020) 108254.

Mohana Krishnudu, D., Sreeramulu, D., & Reddy, P.V. Alkali treatment effect: Mechanical, thermal, morphological, and spectroscopy studies on abutilon indicum fiber-reinforced composites. J. Nat. Fibers, (2020) 17(12): 1775–1784.

Farahani, G.N., Ahmad, I., & Mosadeghzad, Z. Effect of fiber content, fiber length and alkali treatment on properties of kenaf fiber/UPR composites based on recycled PET wastes. Polym. Plast. Technol. Eng., (2012) 51(6): 634–639.

Sheltami, R.M.E., Abdullah, I., & Ahmad, I. Structural Characterisation of Cellulose and Nanocellulose Extracted from Mengkuang Leaves. Adv. Mat. Res., (2012) 545: 119–123.

Khan, M.N., Rehman, N., Sharif, A., Ahmed, E., Farooqi, Z.H., & Din, M.I. Environmentally benign extraction of cellulose from dunchi fiber for nanocellulose fabrication. Int. J. Biol. Macromol., (2020) 153: 72–78.

Segal, L., Creely, J.J., Martin, A.E., and Conrad, C.M. An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text. Res. J. (1959) 29(10): 786–794.

Roy, A., Chakraborty, S., Kundu, S.P., Basak, R.K., Majumder, S.B., & Adhikari, B. Improvement in mechanical properties of jute fibres through mild alkali treatment as demonstrated by utilisation of the Weibull distribution model. Biores. Technol. (2012) 107: 222–228.

El Oudiani, A., Ben Sghaier, R., Chaabouni, Y., Msahli, S., & Sakli, F. Physico-chemical and mechanical characterisation of alkali-treated Agave americana L. fiber. J. Text. Inst., (2012) 103(4): 349–355.

Li, X, Tabil, L.G., & Panigrahi S. Chemical treatments of natural fiber for use in natural fiber-reinforced composites: a review. J. Polym. Environ., (2007) 15: 25–33.

Li, Y., Mai, Y.W., & Ye, L. Sisal fiber and its composites: a review of recent developments. Compos. Sci. Technol., (2000) 60: 2037–2055.

Yussuf, A.A., Massoumi, I., & Hassan, A. Comparison of polylactic acid/kenaf and polylactic acid/rise husk composites: the influence of the natural fibers on the mechanical, thermal and biodegradability properties. J. Polym. Environ., (2010) 18: 422–429.

Pitchayya Pillai, G., Manimaran, P., & Vignesh, V. Physico-chemical and Mechanical Properties of Alkali-Treated Red Banana Peduncle Fiber. J. Nat. Fibers, (2020) 1–10.

Ganapathy, T., Sathiskumar, R., Senthamaraikannan, P., Saravanakumar, S.S., & Khan, A. Characterisation of raw and alkali treated new natural cellulosic fibres extracted from the aerial roots of banyan tree. Int. J. Biol. Macromol., (2019) 138: 573–581.

Kathirselvam, M., Kumaravel, A., Arthanarieswaran, V.P., & Saravanakumar, S.S. Characterisation of cellulose fibers in Thespesia populnea barks: Influence of alkali treatment. Carbohydr. Polym., (2019) 217: 178–189.

Reddy, N., & Yang, Y. Structure and properties of high quality natural cellulose fibers from cornstalks. Polym., (2005) 46(15): 5494–5500.

Mwaikambo, L.Y., & Ansell, M.P. The effect of chemical treatment on the properties of hemp, sisal, jute and kapok for composite reinforcement. Die angewandte makromolekulare Chemie, (1999) 272(1): 108–116.

Ouajai, S., & Shanks, R.A. Composition, structure and thermal degradation of hemp cellulose after chemical treatments. Polym. Degrad. Stab., (2005) 89(2): 327–335.

Tserki, V., Matzinos, P., Kokkou, S., & Panayiotou, C. Novel biodegradable composites based on treated lignocellulosic waste flour as filler. Part I. Surface chemical modification and characterisation of waste flour. Compos. Part A Appl. Sci. Manuf., (2005) 36(9): 965–974.

Spinacé, M.A.S., Lambert, C.S., Fermoselli, K.K.G., & Paoli, M.A.D. Characterisation of lignocellulosic curaua fibres. Carbohydr. Polym., (2009) 77(1): 47–53.

Arnata, I. W., Fahma, F., Richana, N., & Sunarti, T. C. (2019). Cellulose production from sago frond with alkaline delignification and bleaching on various types of bleach agents. Orient. J. Chem., 35(Special Issue 1): 8–19.

Cherian, B.M., Leão, A.L., de Souza, S.F., Thomas, S., Pothan, L.A., & Kottaisamy, M. Isolation of nanocellulose from pineapple leaf fibres by steam explosion. Carbohydr. Polym., (2010) 81(3): 720–725.

Sahu, P., & Gupta, M. K. Mechanical, thermal and morphological properties of sisal fibres. In IOP conference series: Mater. Sci. Eng., (2018) 455(1): 012014.

Abdal-Hay, A., Suardana, N.P.G., Choi, K.S., & Lim, J.K. Effect of diameters and alkali treatment on the tensile properties of date palm fiber reinforced epoxy composites. Int. J. Precis. Eng. Manuf., (2012) 13(7): 1199–1206.

Musanif, I.S., & Thomas, A. Effect of alkali treatments of physical and mechanical properties of coir fiber. Chem. Mat. Engin., (2015) 3(2): 23–28.

Cai, M., Takagi, H., Nakagaito, A.N., Li, Y., & Waterhouse, G.I. Effect of alkali treatment on interfacial bonding in abaca fiber-reinforced composites. Compos. Part A: App. Sci. Manuf., (2016) 90: 589–597.

Leman, Z., Zainudin, E.S., & Ishak, M.R. Effectiveness of alkali and sodium bicarbonate treatments on sugar palm fiber: mechanical, thermal, and chemical investigations. J. Nat. Fibers. (2018) 17(6).

Prithiviraj, M., & Muralikannan, R. Investigation of Optimal Alkali-treated Perotis indica Plant Fibers on Physical, Chemical, and Morphological Properties. J. Nat. Fibers, (2020) 1–14.


Refbacks

  • There are currently no refbacks.


Call for Submissions

We welcome submissions for the coming issue that will be officially published in March 2022. We are committed to providing results of reviewing within two weeks, and publishing the paper within one month from the submission date (subjected to responses by authors). This means accepted papers will be available online even before the issue is published officially.

Publons Partners

Journal of Polymer Science and Technology (JPST) is now one of Publons Partners. This means biodata of reviewers in Publons will be automatically updated once reviewing on articles submitted to JPST is completed (subjected to terms and conditions).

How to promote journal articles

Promoting your journal article is imperative to maximise the exposure, enhance the discoverability and increase engagement with readers and other academics. Together with the publisher, as an author, you can help to promote your newly published articles via the following:

1) Institutional webpage.
Provide the link of your latest article in your institutional website. The webpage visitors who view your profile will be able to see your latest research and publications.

2) Social media.
The rise of the social media has also profoundly affected the publishing fraternity. More and more users have chosen the social media platforms as a way of sharing. Social media sharing helps foster convenient dissemination of information, which can be achieved within a short time. You can share your article in major online social media platforms including Twitter, Facebook, LinkedIn and so on.

3) Utilise scholarly networking and reference platforms.
A scholarly or academic networking platforms such as Academia.edu, MyNetResearch, ResearchGate, Mendeley and so on are indeed useful as they help bring scholars of common areas of expertise close together.

4) Press Releases.
If your article involves a new, significant or important discovery, consider linking up with media organisations for a press release. This brings your work to the mainstream media.

5) Blog.
If you keep a personal blog, you can get your blog readers updated with the list of your most recently published articles and the development in your area of research. Linking your article in your personal blog can vastly enhance the discoverability. Discuss briefly about the article and how the users might benefit from it.

6) Add to reading list or assignment.
Add your article (or the journal your article is published) as essential reading to your students. You may also create related assignments, e.g. review of the article, or have them discussed about the write up in class.

7) Add to your signature.
Announce your latest publication underneath your signature. Provide a link where the article can be downloaded/viewed.